Product ID:SPEEDHIDE WHITE/PASTEL, 6-1110
MSDS Date:07/19/1990
FSC:8010
NIIN:00N036106
MSDS Number: BQLSD

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-245-2590

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

15 MG/M3 TDUST;5 MG/M3 RDUST.

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 5-10%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10 MG/M3 TDUST

1); (CALCIUM CARBONATE).

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 15-20%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10 MG/M3 TDUST

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 25-30%

FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 25-30%

AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO

RTECS: 9999999ZZ

AVOID LONG TERM &

RTECS: 9999999ZZ

INHAL MASS QTYS OF TITANIUM DIOXIDE DUST IN LONG-TERM

RTECS: 9999999ZZ

IN MFR OF PIGMENT INDICATE NO INCR RISK OF CANCER

RTECS: 9999999ZZ

FROM COATINGS IS VERY LIMITED. SINCE OVEREXPOSURES

RTECS: 9999999ZZ

OF AIRBORNE CONTAMINANTS AGAINST WHICH

RTECS: 9999999ZZ

LEL IN FIRE & EXPLO HAZ BELOW STATED LIMIT, & TO

RTECS: 9999999ZZ

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES EYE IRRIT. SKIN: MAY CAUSE MOD SKIN IRRIT.
INHAL:VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.VAPS IRRIT EYES,
NOSE,& THROAT.RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP
SYS & PERMBRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY DELIB CONC &
INHAL CONTENTS (ING 7)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS, &
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENTS LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES
MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOC WITH EXCESSIVE
SKIN CONT.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LST 15 MINS. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CNTRL CNTR, EMER
ROOM/PHYS IMMED; HAVE MSDS INFO AVAIL. INGEST EXCESSIVE EXPOS TO
CORR MATL (SUPDAT)

Flash Point Method:PMCC
Flash Point:107F,42C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.WATER SPRAY MAY BE INEFT.WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILDUP & POSS (ING 6)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT,ELEC EQUIP,SPARKS,& OPEN FLAMES. CLSD CNTNRS MAY EXPLO WHEN
EXPOS TO EXTREME HEAT.DO NOT APPLY ON HOT SURFS. (SUPDAT)

Spill Release Procedures:PROVIDE MAX VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE, OR OTHER ABSORBE NT MATERIAL AND PLACE INTO CONTAINERS
FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MAT IS PART OF MULTIPLE COMPONENT COATING SYS,READ
MSDS FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG MIX
MAY HAVE HAZ OF ALL OF ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING.AVOID FR EE FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXPOS TO VAPS MAY BE PVNTD BY ENSURING VENT
CNTRLS,VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C) PAINT
SPRAY/AIR SUPP (TC-19C)RESP MAY ALSO REDUCE EXPOS.READ RESP MFR'S
INSTRUCTIONS & LITE RATURE CAREFULLY TO DETERM TYPE (ING 11)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 12)
Protective Gloves:POLYVINYL ALCOHOL, NEOPRENE RUB,(SUPDAT)
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:WEAR PROT CLTHG, INCL IMPERMEABLE APRON
CONSTRUCTED OF POLYVINYL ALCOHOL, NEOPRENE RUB,NITRILE RUB, BUTYL
RUB/LATEX RUB.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
% VOLAT: 47.20 (VOL); 72.72 (WT). EXTING MEDIA: CLASS II COMBUST LIQ
FIRES. EXPLO HAZ:TOX GASES MAY FORM WHEN PROD IS CONTACTED BY
FLAME/HOT SURFS. HAZ DECOMP PRODS: INCL: CARBON MONOXIDE. FIRST AID
P ROC: PERSISTENT SKIN/EYE IRRIT/BRTHG DFCLTYS. PROTECTIVE GLOVES:
NITRILE RUBBER, BUTYL RUBBER OR LATEX RUBBER.

HCC:F4
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:2.3
Vapor Density:HVR/AIR
Spec Gravity:1.36
Evaporation Rate & Reference:17 (BUTYL ACETATE=100)
Solubility in Water:0.2%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF
SOLVENTS LISTED IN INGREDS SEC.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.